10x10 Booth Pro-Package A




$1,599.00 $2,305.00

Monitor mount (see Additional Info)
Double-sided back wall printing
Podium (see Additional Info)

Product Details

What's the Pro-Package series?
* Impressive 3D arches and towers, max height and max depth for max impact.   
* Monitor mounts on towers and arches (optional)
* Optional LED lighting and backlit displays.
* Rich vivid fabric graphics can be updated, re-using the hardware
* Portable.  Made from snap-together aluminum tubes and high-resolution stretch fabric graphic.
* Free shipping

Pro-Package A is designed for a 10' W x 10' D x 10' H booth space.  Allow 2 weeks for production (1 week with Rush) followed by shipping.   

Pro-Packages can have their graphic skins updated for future event.  Re-use your frame hardware and get a set of new graphic prints for about half the cost of a complete set of hardware and graphics.  Please email so we can look up your previous Pro-Package order details.


  • 1x 10 ft high Tower, retail $949
  • 1x Arch, retail $892
  • 1x Back wall, retail $635

Recommended options:

  • 5' Vibrant LED backlit double-sided banner  (TDD-LED-VBB5), add-on cost $299, separately $399, retail $678.
  • 7' Vibrant LED backlit double-sided banner (TDD-LED-VBB7), add-on cost $399, separately $499, retail $1378
  • 1-2x Monitor mounts on tower and/or arch, $99/ea, retail $149
  • LED lights $71/ea, retail $139/ea
  • Large Trade Show Counter with Storage with graphic print $399
  • Side Wall $349 single-sided, or double-sided $449.  The side wall can be placed under the arch or at 90 degrees to the backwall
  • Please email to add-on options.

Dimensions and weight:

  • Tower:  approximately 3' W x 10' H x 1' D (90 cm W x 300 cm H x 30 cm D).
  • Back wall:  approximately 6.5' W x 7.5' H (200 cm W x 225 cm H),
  • Arch:  approximately 8' H x 8' D (240 cm H x 240 cm D),
  • Total weight including hardware and printed graphics, about 71 lbs (36.5 kg)
  • The tower and arch are approximately 35" W (90 cm W).

Additional info:

  • If your booth space does not allow for a 10' H structure or do not have 10' depth from aisle to back of booth, we can adjust either the depth to fit an 8' deep space, or the height to fit in 8' of height at no cost change.  Please email to do so after placing your order.  Alternatively you can get Pro-Package M which is 10' wide and slightly lower in height and depth.
  • This package has made-to-order hardware and graphics.  Please note the production time.  
  • Add a monitor mounts now as they cannot be separately ordered and added later.   Max monitor size 36", max weight 20 lbs (10 kg).   Pro-Package A's monitor mount vertical center is about 5' 3" (160 cm) off the ground, or about 61" (155 cm) above the bottom of the print.
  • The included tower has printing on all 4 sides including the back of the booth.  Similarly the arch has printing on all sides including top facing the ceiling, bottom facing the floor, outside facing the aisle, and inside.  The back wall has its back side white. The back wall can be printed double-sided for $109. 
  • The Large Podium with Graphic Print shown on this page is a counter not a case. 
  • Recommended:  Add a Large Hard Roller Case-Podium.  Everything (except an optional Vibrant back wall) will then ship in this case which converts to a podium with graphic wrap.  Images of this Case-Podium are found on Pro-Package M's page.
  • Add a side wall to install on the outside side of the arch, semi-enclosing the area.  Approximate dimensions are 94" W x  83" H (240 cm W x 210 cm H). When ordered with the package the side wall cost is $349, or double-sided $449.  Please email to add this to your package.
  • The Quick Start installation guide is here.

Expandable to 20' wide:

  • Order two Pro-Package A's, and when installing in a 20x10 space, place the two towers and arches away from each other.  Place the two back walls adjacent to each other.   Note that there will be a slight gap between the two back walls as they are not connected.  To remove the gap, you can later or in same order, additionally order a back wall that is twice as wide, using it in place of the two smaller back walls.  The double-wide back wall is approximately 13' W x 7.5' H (400 cm W x 225 cm H) and is $599 single-sided or $765 double-sided.

    Graphic specifications and blank templates

    The layered blank templates and PDF design guides can be downloaded from these links.

    Pro-Package A (arch, back wall, tower) TDD-PPU-PPA.zip
    Large Hard Roller Case-Podium TDD-CRG-DLG.zip
    Large Podium with Graphic Print TDD-TAB-LKMX.zip
    Vibrant LED Backlit Banner (double-sided, you can send 2 different files) TDD-LED-VBB5.zip

    After placing your order, please upload your files to the Upload link at the top of the site.

    3D booth views

    Pro-Package A 3D trade show booth Left view

    Pro-Package A 3D booth front  view

    Pro-Package A 3D 10 foot fabric booth right view

    Pro-Package A 3D trade show booth floorplan view

    Back To Package Deals

    Hello You!

    Join our mailing list